Manufacturing Computer Support Technician 2nd Shift
Location: San Diego
Posted on: September 23, 2022
San Diego - CA, US
Other job categories
Introduction to the job
ASML is one of the world s leading manufacturers of lithography
systems that help enable Moore s Law and the creation of
increasingly powerful and capable electronic devices. Our San
Diego-based light source division, Cymer, is renowned for
developing both deep ultraviolet (DUV) lithography light sources
and next generation extreme ultraviolet (EUV) light sources.As the
world s leading semiconductor equipment manufacturer, ASML enables
chipmakers to produce cheaper, speedier chips - and to produce them
faster - thereby enabling all the technology you use today. The
systems we produce integrate several large and sophisticated
machines, themselves each a feat of engineering innovation,
precision, and speed.
We are a multinational company with over 70 locations in 16
countries, headquartered in Veldhoven, the Netherlands. We have 18
office locations around the United States including main offices in
Wilton, CT, Chandler, AZ, San Jose, CA and San Diego, CA. We are
currently recruiting for internships located at our office in San
In the Cymer Light Source (CLS) division in San Diego, we design
and manufacture Deep Ultraviolet (DUV) lasers, used directly in the
chipmaking process. Far from a basic "consumer" laser, these
machines are complex, powerful, and flexible. The lasers we make
require: durable and high-speed precise motion-controlled optics to
maintain wavelength to femtometer accuracy under high laser powers;
advanced materials to endure the harsh Fluorine-rich environments
and high powers; clever mechanical designs to allow high
performance and fit all the parts within a confined space, but
still allow easy manufacturing and servicing; very fast high power
electronics and electrical designs to deliver short high voltage
pulses at precise timing to control pulse energy within hundredths
of a percent; gas flows at hurricane speeds to keep the laser
discharge area clear; cutting edge controllers and algorithms to
deliver stable and consistent performance and automate all
operations; and advanced real-time electronics, firmware and
software to control the laser and interact with other equipment.
The laser needs to minimize use of expensive or rare resources like
energy or Neon gas. It needs to actively control temperatures,
pressures, gas concentrations and voltages precisely to maintain
good performance. It must react instantly to changing customer
demands and environmental conditions. And it needs to do all of
this, operating continuously and reliably for months while
producing billions of perfect light pulses, without any human
intervention or downtime.
If you have a passion for technology and innovation you ll want to
check us out. Be a part of Cymer / ASML. Be a part of progress.
Role and responsibilities
We have an exciting opportunity for a Manufacturing Equipment
Maintenance Computer Test Support Technician to join our
manufacturing operations here at our San Diego location. This is a
2nd shift position with hours of 2pm to 10:30pm, Monday - Friday.
This role is also automatically eligible for a $2,000 sign-on bonus
for the selected candidate.
This position enables the success and uninterrupted output of
manufacturing operations. High focus on uptime of manufacturing
test equipment and tooling. Performs computer electrical and
mechanical troubleshooting, repair and testing of in-house lasers,
test fixtures, and associated test equipment to maintain equipment
in optimum condition. Dismantles, adjusts, repairs and assembles
equipment according to layout plans, blueprints, operating or
repair manuals, rough sketches or drawings. Uses test and
diagnostic equipment to perform checkouts. Rebuilds manufacturing
equipment as required. May perform equipment modifications as
directed by manufacturing engineers.
Duties and Responsibilities
Ability to use standardized tools and electronic measuring
equipment (i.e., torque wrenches, electric and pneumatic
screwdrivers and ball drivers, lifting equipment) to install/remove
or perform testing and troubleshooting.
May train others on test processes and troubleshooting.
Performs a variety of moderate technical service/support duties,
complex in nature, requiring specialized knowledge (i.e.,
sub-assembly, assembly, build, test, R&D, QA).
May utilize functional area databases to run reports and analyze/
trend data and make recommendations to management in order to meet
Determines or recommends methods and procedures on new assignments,
and may provide guidance to other Manufacturing, Assembly, or
Manufacturing Engineering personnel.
Works with management to enforce safety and security
Qualified to effectively perform maintenance on high purity vacuum
and gas, oil delivery, and pneumatic systems.
Proficient in determining the nature of a production problem;
evaluate resources; coordinate with available personnel to achieve
a desirable outcome, while assigned as the on-call mechanic.
Familiarity with PLC logic and automated control systems.
Capable of accurately and efficiently entering all data related to
assigned tasks into a Computerized Maintenance Management
Ensure a timely response, repair and solution to equipment related
issues, and take action to solve problems, when they are
encountered, by teaming with other organizations/ individuals to
ensure customer satisfaction.
Comply and enforce company s/ OSHA s Lock-out Tag-out procedures
and all pertinent safety instructions, fully understanding Safety
Data Sheets and OSHA s Hazard Communication System.
Performs other duties as assigned.
Education and experience
Requires a High School Diploma or equivalent.
Associate s Degree in technical or scientific field is highly
A minimum of four (4) years of related work experience
Experience in using electronic, pneumatic, and hand tools
Working at the cutting edge of tech, you ll always have new
challenges and new problems to solve - and working together is the
only way to do that. You won t work in a silo. Instead, you ll be
part of a creative, dynamic work environment where you ll
collaborate with supportive colleagues. There is always space for
creative and unique points of view. You ll have the flexibility and
trust to choose how best to tackle tasks and solve problems.
To thrive in this job, you ll need the following skills:
Advanced knowledge of computer software, hardware and experience
Advanced knowledge of Windows 2000/XP/7 and 10.
Familiar with networking protocols, hardware configurations and
Ability to build and repair custom cable assemblies.
Electronics repair to board level a plus.
Ability to read and interpret data, information, documents and
Able to use electric/pneumatic tools.
Must be able to follow written assembly procedures and bill of
Experience with electro-optical and/or opto-mechanical systems as
well as environmental testing is desired.
Experience with Automated Testing Equipment, LabVIEW preferred.
Highly skilled user of tools and equipment (e.g., oscilloscopes,
voltage and current probes, multi-meters, leak detectors, chart
recorders and electro/ mechanical tools); may be viewed as the "go
to" person for answering technical questions.
Ability to perform in-process quality inspections of components
and/or full assemblies within the Manufacturing area(s).
Knowledge of Lean Manufacturing and 5S principles preferred.
Excellent written and verbal communication skills. Act as point of
contact to IT department for network issues.
Ability to work with minimal supervision.
Ability to work in a multi-shift environment.
Capability to work in a team environment.
Flexibility to work off shift hours to support company requirements
and fill-in, as required, in other departments.
Can learn and apply new information or skills.
Can work under deadlines.
Diversity & Inclusion
ASML is an Equal Opportunity Employer that values and respects the
importance of a diverse and inclusive workforce. It is the policy
of the company to recruit, hire, train and promote persons in all
job titles without regard to race, color, religion, sex, age,
national origin, veteran status, disability, sexual orientation, or
gender identity. We recognize that diversity and inclusion is a
driving force in the success of our company.
Thisposition is located on-site in San Diego, CA . It requires
onsite presence to attend in-person worrk-related events, trainings
and meetings and to further ensure teamwork, collaboration and
While performing the duties of this job, the employee routinely is
required to sit; walk; talk; hear; use hands to keyboard, finger,
handle, and feel; stoop, kneel, crouch, twist, reach, and
Specific vision abilities required by this job include close
vision, color vision, peripheral vision, depth perception, and
ability to adjust focus.
The environment generally is moderate in temperature with moderate
to high noise level in a cleanroom environment.
Must be willing to work in a cleanroom or manufacturing
environment, wearing assigned Personal Protective Equipment (PPE):
coveralls, masks, hoods, booties, safety glasses and/or gloves for
entire duration of shift.
Must be willing to occasionally lift, pull and/or push up to 35
EOE AA M/F/Veteran/Disability
..... click apply for full job details
Keywords: ASML, San Diego , Manufacturing Computer Support Technician 2nd Shift, IT / Software / Systems , San Diego, California
Didn't find what you're looking for? Search again!